Autor Wątek: Dive Rite issues  (Przeczytany 1223 razy)

Offline Iron

  • Administrator
  • *****
  • Wiadomości: 764
  • Płeć: Mężczyzna
    • Zobacz profil
  • Stopień nurkowy: M1
Dive Rite issues
« dnia: 24 Grudzień 2009, 00:59:35 »
Moje skrzydełko jest OK... ale jak ktos nurkuje na skrzydłach Dive Rite to dobrze jest się zainteresować tematem.

Cytuj (zaznaczone)
Dive Rite issues a voluntary recall on various Wings

The U.S. Consumer Product Safety Commission, in cooperation with Dive
Rite, announced a voluntary recall of v. Partial obstruction of
various Wings. The over pressure valve springs in the diving equipment
could rust and fail allowing the buoyancy compensator devices to leak,
posing a drowning hazard to divers. No injuries have been reported.

Springs were used on wings that have an opaque white or blue tinted
bladder and welded in flanges. Wings with a black bladder are not
affected. Only the Dive Rite wings that have a serial number range
from 42000 through 72000 are affected by this recall. The serial
numbers can be found on a white tag attached along a seam of the wing.

Consumers should immediately stop using recalled diving equipment and
return it to an authorized distributor or dealer for a free
replacement of the overpressure valve spring.
For additional information, contact Dive Rite at (800) 495-1046, or
look on the website for further information at
http://www.diverite.com/products/servic ... ringrecall
« Ostatnia zmiana: 01 Styczeń 1970, 01:00:00 wysłana przez Iron »
/Tomek
tel. 728401279